![background image](http://html.mh-extra.com/html/olympus/c030303zoom/c030303zoom_instructions-manual_733935017.webp)
17
Manual focus
Press the OK button to turn on the LCD monitor. Press the right arrow on the
Jog dial to select the Manual focus mode. While looking at the LCD monitor,
press the top/bottom arrows on the Jog dial to select the distance. When the
cursor is moved below 0.8 m, shorter distances will appear on the LCD monitor.
Press the OK button to save the setting.
Zoom
Press the lever to T to choose Telephoto shooting. Press the lever to W to
choose wide-angle shooting. Only digital zoom is available in the
mode.
Use the LCD monitor to check images that have been zoomed-in or -out.
• The image will be more grainy the more you zoom to a subject because only
Digital zoom is available in the
mode.
• When movie recording while zooming, images may become jittery.
Digital zoom mode
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select DIGITAL ZOOM. Press the right arrow on the Jog dial, then press the
top/bottom arrows to select ON or OFF. Press the left arrow on the Jog dial to
confirm the setting. If you take a picture without pressing the OK button, the setting
will be valid until the Menu is canceled.
Note:
• The setting will be canceled and only the optical zoom will be available
when the LCD monitor is turned off.
• Images may be grainy in this mode.
Spot metering mode/Macro mode/Macro mode +Spot metering mode
You can select the following modes with each press of the Spot/Macro button.
Digital ESP metering/Auto focus
Spot metering mode
Macro mode
Shooting range: Approx 0.2 ~ 0.8m
Macro mode + Spot metering mode
➠
➠
➠
➠