![background image](http://html2.mh-extra.com/html/olympus/c-700-camedia-ultra-zoom/c-700-camedia-ultra-zoom_pocket-manual_4128341002.webp)
F
A
Q
d i g i t a l c a m e r a
2
How do I view my pictures on a TV?
Connect your camera’s AV output terminal to your TV’s AV input
terminal using the provided AV cable. Also, refer to your TV’s
instruction manual before connection.
3
How do I display thumbnail pictures on
the camera?
Set the mode dial to
, then move the Zoom lever to “W” (Index-
display mode). To display an image in its full size, choose it with the
green frame on the display by using the Arrow pad, then move the
Zoom lever to “T”. To select the number of the frames to display in
this mode, select SETUP—
— 4, 9, or 16 from the menu.
d i g i t a l c a m e r a
F
A
Q
P O C K E T
G
U
I
D
E
C-700
Ultra Zoom
●
P R O B L E M
Others
1
What types of batteries can be used
with this camera?
CR-V3 lithium battery packs (x 2), AA (R6) NiMH batteries (x 4),
NiCd batteries (x 4), Alkaline batteries (x 4) or lithium batteries
(x 4).
2
How do I erase all the pictures on the
card at the same time?
Set the mode dial to
. Select MODE MENU—CARD—CARD
SETUP—ALL ERASE , then press
.
3
How do I avoid erasing pictures on a
card accidentally?
Attach the provided write-protect seal to the part of the card
marked with
.
Problem
1
How do I check my picture right after
shooting?
Press the Monitor button (
) twice quickly without turning the
mode dial to
. The picture you just took will be displayed. If you
don’t like it, press
, select YES, then press
to erase it. Use
the Arrow pad to select other pictures to check. Press the Shutter
button halfway to return to the shooting mode.
d i g i t a l c a m e r a
http://www.olympus.com
For America
(T echnical support)
T el. 1-888-553-4448 (T
oll-free) (First 30 days after purchase)
(T echnical support)
T el. 1-631-844-5520 (After 30 days)
(E-Mail) [email protected]
For Europe
(Hotline numbers)
T el. 01805-67 10 83
for Germany
T el. 00800-67 10 83 00
for Austria, Belgium, Denmark, France,
Netherlands, Norway, Sweden, Switzerland,
United Kingdom
T el. +49 180 5-67 10 83
for Finland, Italy , Luxembourg, Portugal, Spain,
Czech Republic
T el. +49 40-237 73 899
for Greece, Croatia, Hungary and the rest of Europe
(E-Mail) [email protected]
1
How do I turn on the Monitor?
Press the Monitor (
) button. The Viewfinder is always on
when the camera's power is on.
2
How do I take a clear picture easily?
Try setting the “AUTO” mode on the Mode dial if you are a begin-
ner. Your camera will then automatically decide the best settings.
3
How do I stop the beep each time I
press a button?
Set the Mode dial to any position except “AUTO”, then press the
OK/Menu button (
). Select “MODE MENU”— “SETUP”—
“
”— “OFF”, then press
again.
4
Why doesn't the flash fire, even
though I'm in
AUTO mode?
Check that the flash is popped up. If not, press the Flash switch.
5
How do I take a black & white or
sepia tone picture?
Set the Mode dial to the desired position (except “AUTO”), then
press
.
Select “MODE MENU”— “CAMERA”— “FUNC-
TION”— “BLACK&WHITE” or “SEPIA”, then press
again.
6
How do I brighten a subject when the
background light causes it to be
underexposed?
Use Spot metering to obtain proper exposure in an extreme
backlight situation.
When framing a picture where the subject is not in the center,
put the subject in the center of the Viewfinder/Monitor and lock
the focus and exposure by pressing the Shutter button halfway.
Then, without letting go of the Shutter button, frame the desired
picture and press the Shutter button fully. AE lock is also useful
when you only want to lock the exposure.
7
How do I focus on a subject not in the
center of the frame?
Unless the focus is locked, the camera always focuses on the cen-
ter of the frame. If your subject is not in the center, place it there at
first, then press the Shutter button halfway to lock the focus and
exposure. Finally, without letting go of the Shutter button, compose
your desired picture and press the Shutter button fully.
8
How do I use the A/S/M modes?
A—Aperture priority
This lets you set the aperture manually. For example, if you want
to focus on both your subject and the background, make the
aperture smaller. If you want to focus on only your subject, make
the aperture larger.
S—Shutter speed priority
This lets you set the shutter speed manually. For example, set-
ting a fast shutter speed lets you capture a moving subject with-
out blur. Setting a slow shutter speed lets you create a sense of
movement (flowing water, sports scenes, etc.)
M—Manual exposure mode
This lets you set both the aperture and shutter speed.
Shooting
Printed in Japan
VT255902
Playback