Complete Teardown, Cleaning, and Reassembly of the Olympus BH2-BI30 Binocular Viewing Head
(
Rev. 1)
Page 33 of 34
Figure 136 – Place trim ring over the ocular tube (right)
Figure 137 – Press trim ring into adhesive to seat it (right)
Ready for Service
The newly reconditioned BH2-BI30 binocular viewing
head is now ready to be put back into service.
Original Olympus Documentation
A PDF version of the Olympus repair manual for the
BH2-BI30 binocular viewing head was used as a
reference during the preparation of this document (see
Figure 138 – The Olympus BH2-BI30 repair manual
In addition to the above-referenced BH2-BI30 binocular
viewing head repair manual, a PDF of an early version of
the Olympus BH2 (BHS) repair manual
was also used
(see
).
Figure 139 – The Olympus BH2 (BHS) repair manual
The PDF versions (scans of original hard copies) of both
of these useful Olympus resources are available for
download at various microscope-related hobbyist sites
on the internet, and can usually be located by searching
for the document title in an internet search engine,
such as Google or Bing.
How to Contact the Author
Please feel free to direct any questions or comments
regarding this document (or BH-2 microscopes in
general) to the author, at the following email address: