37
Setting the date and time
1
Ge
tt
ing st
ar
te
d
6
Press
to select one of the
following date formats: Y-M-D
(Year/Month/Day), M-D-Y (Month/
Day/Year), D-M-Y (Day/Month/Year).
Then press .
• Move to the year setting.
• The following steps show the procedure
used when the date and time settings are
set to Y-M-D.
7
Press
to set the year, then
press to move to the month
setting.
• To move back to the previous setting,
press
. The first two digits of the year
are fixed.
8
Repeat this procedure until the
date and time are completely set.
9
Press .
• For a more accurate setting, press
when the time signal hits 00 seconds.
The clock starts when you press the
button.
10
To turn the camera off, set the
power switch to OFF.
• The current settings are retained even when the power is turned off,
unless they are readjusted.
• The date and time settings will be canceled if the camera is left
without batteries for approximately 1 hour. The settings will be
canceled more quickly if the batteries were only loaded in the
camera for a short time before being removed. Before taking
important pictures, check that the date and time settings are correct.
Y M D
SELECt
GO
SEt
SELECt
GO
SEt
Power switch
Note