Olympus 5050 - CAMEDIA C Zoom Digital Camera Reference Manual Download Page 204

Page: 204 / 268

203

Trimming

rint
se
tt

ing

Press

to select OK, then

press .

• The busy bar is displayed during trimming,

then the camera returns to the single-
frame reservation screen.

• If you want to trim the picture again, select

RESET and press

and repeat the

procedure from Step 3.

• To quit the trimming function, select CANCEL and press

Press

to complete the print reservations and return to

the picture selection screen. Press

again.

Press to select END.

• To return to the

PRINT ORDER

screen, press

again.

• The size of the printed picture varies depending on the printer

settings. If the trimmed picture size is small, printing magnification
increases accordingly, resulting in a printed picture with lower
resolution.

• For best results with close-up prints, you are recommended to use

theTIFF, SHQ or HQ mode.

• The original picture is not trimmed. If your printer does not have the

DPOF function, the picture will be printed untrimmed.

• Do not rotate pictures that have been trimmed, otherwise the

cropped area will change.

• The vertical to horizontal ratio in the trimming screen can be

changed using the arrow pad, but if the zoom lever is used, the ratio
is fixed at 4:3. If images recorded in 3:2 are trimmed, the ratio is also
fixed at 4:3.

SELECt

RESEt

CANCEL

END

CANCEL

SINGLE PRINt

Note

Summary of Contents for 5050 - CAMEDIA C Zoom Digital Camera













































































































































































































































































Search results

Summary of Contents for 5050 - CAMEDIA C Zoom Digital Camera

Reviews:

Olympus 5050 - CAMEDIA C Zoom Digital Camera, Reference Manual, Page: 204 / 268

Search results

Summary of Contents for 5050 - CAMEDIA C Zoom Digital Camera

Reviews: