DMTA-10022-01EN, Rev. C, January 2015
Chapter 1
22
1.5
Keypad Functions
The 45MG comes either with the English or the international keypad (see Figure 1-5
on page 22). The functions are the same for both keypads. On the international
keypad, the text labels on many keys are replaced by pictograms. In this document,
keypad keys are referred to using the English label in bold and within brackets (ex.:
[MEAS]
).
Figure 1-5 The 45MG keypads
Each key is labelled according to its primary function. The area immediately above
certain keys contains a secondary key function that can be activated by first pressing
[2nd F]
. Throughout this document, references to a secondary function are written as
follows:
[2nd F]
,
[Primary] (Secondary)
. For example, the instruction to activate the
REF Value
function is written as follows: “Press
[2nd F]
,
[SAVE] (REF Value)
”.
The
[
]
,
[
]
,
[
]
, and
[
]
keys, along with the
[ENTER]
key, are used to select menu
items or screen parameters, and to change parameter values. Use the
[MEAS]
key at
any time to return to the measurement screen. The yellow keys are related to
calibration.
Table 2 on page 23 lists the key functions available on the 45MG keypad. Many
functions are optional, and may not be available depending on which software
options have been purchased.
English keypad
International keypad
Summary of Contents for 45MG
