![background image](http://html1.mh-extra.com/html/olympus/262921/262921_instruction-manual_4061524102.webp)
102 EN
Information
11
Using electronic view
fi
nder (sold separately)
If you use the electronic view
fi
nder (sold separately: VF-2), you can view the
shooting screen in the
fi
nder. This is convenient when you are in a very bright
location, such as under direct sunlight, where it is dif
fi
cult to view the monitor,
or are using the camera at a low angle. Also refer to the electronic view
fi
nder’s
manual.
1
Turn off the camera.
2
Slide off the hot shoe cover.
Keep the shoe cover in a safe place to
avoid losing it.
3
Remove the connector cover from
the electronic view
fi
nder.
•
4
Align the electronic view
fi
nder with the hot shoe on the camera
body, and slide it in until it stops.
Insert the electronic view
fi
nder by pushing on its lower part.
5
Turn on the camera.
6
Each press of the
u
button switches between the monitor
display and electronic view
fi
nder display.
You can adjust the brightness and color temperature of the electronic view
fi
nder. [EVF ADJUST]:
g
“Accessory port menu options” (P. 90)
7
Turn the diopter adjustment ring to
a position where the image on the
view
fi
nder can be seen clearly.
Adjust the electronic view
fi
nder to your
preferred angle (up to 90 degrees).
#
Caution
You cannot use an external
fl
ash and the electronic
view
fi
nder at the same time.
When carrying the camera, do not hold it by the
electronic view
fi
nder. The camera may separate
from the electronic view
fi
nder and drop.
Do not leave the camera with the electronic view
fi
nder attached in a location subject to direct
sunlight.
•
•
•
•
•
•