Olympus 226730 - Stylus Tough 6000 Digital Camera, Instruction Manual

Page: 30 / 86

30 EN
Recording sound when shooting still
images [
R ]
B
CAMERA MENU X R
: K
s
Submenu 2 Application
OFF No sound is recorded.
ON
The camera automatically starts
recording for approx. 4 seconds
after taking the picture. This is
useful for recording notes or
comments about the picture.
When recording, aim the microphone (p. 6)
at the source of the sound you want to
record.
Reducing the blur caused by the
camera shake when shooting
[IMAGE STABILIZER] (still images) /
[DIS MOVIE MODE] (movies)
B
CAMERA MENU X IMAGE STABILIZER /
DIS MOVIE MODE
:
K
s b
A
Submenu 2 Application
OFF
The image stabilizer is deactivated.
This is recommended for shooting
when the camera is
fi xed in place
on a tripod or other stable surface.
ON The image stabilizer is activated.
The camera’s default settings are [IMAGE
STABILIZER] (still images) to [ON] and [DIS
MOVIE MODE] (movies) to [OFF].
While [IMAGE STABILIZER] (still images)
is set to [ON], noises may occur from the
inside of the camera if the shutter button is
pressed.
Images may not be stabilized if camera
shake is too severe.
When the shutter speed is extremely slow,
such as when taking still shots or taking
pictures at night, the stabilizer may not be
as effective.
When shooting while the [DIS MOVIE
MODE] (movie) is set to [ON], the image will
be enlarged somewhat before saving.
Brightening the subject against
backlight [SHADOW ADJ]
B
CAMERA MENU X SHADOW ADJ
:
K
s b
A
Submenu 2 Application
OFF
Shoots without using [SHADOW
ADJ].
ON
The camera fi nds a person’s
face that has been darkened by
backlight and makes it appear
brighter for taking the picture.
(Point the camera toward the
subject. Check the frame that
appears around the face detected
by the camera, and then press the
shutter button to take the picture.)
For some subjects, the frame may not
appear or may take some time to appear.
When set to [ON], [ESP/ n ] (p. 29) is
automatically fi xed to [ESP], and [AF
MODE] (p. 29) is automatically fi xed to
[FACE DETECT].