Olympia Web.Radio 300, Operating Manual, Page: 34 / 44

Operation
OPERATING
INSTRUCTIONS
www.olympia-vertrieb.de
30 Page
Alarm
Use Alarm 1 No/Yes
If “Use Alarm 1 Yes” has been selected, you are alerted at the time defined
for “Set Alarm 1” by the “Alarm Source” selected. If “Use Alarm 1 No” has
been selected, there is no alarm signal at the time defined.
Press the [
OK ] button to toggle between “Use Alarm 1 No” and “Use Alarm
1 Yes”.
Set Alarm 1
Set the time the alarm should sound. Enter the correct value for the for the
hour. increases the value by 1, decreases the value by 1.
Confirm the value set by pressing [ OK ]. Proceed in the same way for the
minute value.
Use Alarm 2 No/Yes
The procedure is identical to that for Section Use Alarm 1 No/Yes .
Set Alarm 2
The procedure is identical to that for Section Set Alarm 1 .
Alarm Signal
This function is used to set the signal with which the alarm alerts you.
The following are available for selection
S
Beep
S
CD
S
Internet Radio
S
USB
S
SD/MMC
S
FM
Select the menu option required and confirm the selection.
Alarm Volume
Use the [ OK ] to switch between the values 1, 2 and 3.
Sleep mode
Sleep Mode No/Yes
When “Sleep Mode Yes” is selected, the equipment switches to Standby
mode after the time defined in “Sleep Mode Mins”.
Use the [
OK ] button to toggle between “Sleep Mode No” and “Sleep Mode
Yes”.
Sleep Mode Mins
Press the [ OK ] button to switch between the values 5, 10, 15, 20, 30, 60,
90 and 120 minutes.