Olympia Web.Radio 300, Operating Manual, Page: 23 / 44

Operation
www.olympia-vertrieb.de
OPERATING
INSTRUCTIONS
19 Page
While playing recordings
A range of functions are available directly on the remote control while
recordings are being played.
S
Selecting a track number directly
Press the number of the required track. To enter numbers with
more than one digit, press the [ − / −− ] button once or twice
beforehand.
S
Bass
To play recordings with the bass amplified, press the [ X − BASS ]
button. “B − n” appears in the display. Press the button again to
switch the function off.
S
Equalizer
The tone can be set to Normal , Classic “Cls”, Jazz “Jaz”, Pop
“Pop” and Rock “Roc” as required. Press the [ P − EQ ] button
repeatedly until the tone required is selected.
S
A-B
A passage of a recording can be marked and then be played
back in a continuous loop.
Press the [ A-B ] button at the beginning of the required passage.
Press the [ A-B ] button again at the end of the required passage.
The passage is repeated continuously until you press the [ A-B ]
button once again.
S
Repeat
The recording currently being played, or one which has been
selected, can be played repeatedly. Press the [ REPEAT ] button
to repeat the recording currently being played. Press the
[ REPEAT ] button again to repeat all the recordings selected in a
continuous loop. Press the [ REPEAT ] button once again to stop
the repeat function.
S
Random
You can play all the tracks selected in a random sequence.
Press the [ RANDOM ] “Ran” button. Press the [ RANDOM ]
button once again to stop the random function.
Some functions can only be accessed via the “Setup” menu. Press the
[ Setup ] button on the unit or the [ SETUP ] button on the remote control and
navigate to the menu options required. An example of a menu option is
described below
S
Balance
Press the and buttons to select the required volume
balance between the right and left loudspeakers and confirm the
setting by pressing the [ OK ] button.