Setting Up
4
Inserting the microSD memory card
The phone memory can be extended by installing the microSD memory card option. This increases
the quantity of data which can be stored.
1. Open the silver metal clip beside the SIM card slot by sliding it downwards gently until
it unlocks with a soft click. Pivot the metal bar up.
2. Lay the microSD memory card with the contacts facing down in the open compartment.
The shape of the compartment corresponds exactly to the shape of the microSD
memory card, meaning that it cannot be inserted incorrectly.
3. Pivot the metal bar down and prize it gently towards the top of the unit, using a little
force, until the metal bar snaps lightly into place.
Charging the battery
Attention: For safety reasons, only use the charging adapter plug and cable supplied. Other charging
adapters could damage the phone.
WARNING: Before starting to charge the battery, check that it has been installed properly. Do not
remove the battery while it is being charged. This could damage the phone.
WARNING: Only charge the battery when at room temperature. Do not expose the battery to
heat, direct sunlight or temperatures below 0 °C / above 45 °C.
Note:
When charging the battery for the first time, it should be charged for at least 4 hours. Some
batteries only reach their full capacity after several complete charge/discharge cycles. If
the battery is fully discharged, it may take some time for the charging process to be indic
ated.
Connect the power adapter plug and cable as illustrated in the diagram. For safety reasons, only use
the power adapter plug and cable supplied.
