![background image](http://html1.mh-extra.com/html/olympia/vario-duplex-5000/vario-duplex-5000_manual_732528017.webp)
17
Selecting the Type of Cut
The trimmer is equipped to complete three types of cut. The user can select
the type of cut according to the job at hand.
1
Open the hinged cover over the cutting head (Fig. 5, A).
2
Move the selector switch according to the type of cut re-
quired (Fig. 5, B).
Note:
The different types of cut are clearly indicated on the rotary se-
lector switch. Turn the switch to the left to select the wave cut or to the
right for perforation.
3
Close the hinged cover over the cutting head.
Fig.
5
Replacing the Blade
The blade has four cutting edges (2 on each side). When the quality of the
cut is no longer clean, turn the blade so that one of the unused cutting edges
will be used. When all four cutting edges have become worn, replace the
blade:
1
Slide the cutting head to one end the guide rail.
2
Remove the blade out of the slot from the other side (Fig. 6).
3
Slide the new blade in the slot.
Note:
There is a spare blade in the storage compartment in the guide
rail (Fig. 7).
Fig. 6
Fig. 7