Device malfunctions
Problem
Cause
Remedy
Device does not work
Is the mains cable plugged
properly in the socket?
Plug the mains cable into
the socket properly.
Is the switch set to ON?
Set the switch to ON.
The lamp Power shines.
Does the motor not start
when paper is fed in?
Push the paper into the in-
feed slot so that it touches
the sensor in the centre.
Device does not work after
lengthy operation or
stops during operation
Was the device in constant
operation for some time?
Is the surface of the device
warm?
Pull out the mains plug
from the socket and allow
the motor to cool down to
room temperature.
Paper jam
Have you inserted
more than 6 sheets
(406.2C) / 15 (415.4C)
Has the paper not been
inserted straight in the in-
feed slot?
Push switch REV
to push back the paper.
Release Switch REV
to shred the paper remai-
ning in the cutting unit.
Disposal Notes
This symbol [the crossed-out wheeled bin/PICTURE] means that the
product should be brought to the return and or separate collection sy-
stems available to end-users, when the product has reached the end
of its lifetime.
This symbol applies only to the countries within the EEA (*).
(*) EEA = European Economic Area, which comprises the EU Member
States plus Norway, Iceland, and Liechtenstein.
9
Summary of Contents for PS 406.2C
Page 27: ......
