Configuration
Giu
OPERATING
INSTRUCTIONS
21
Page
Activating the GSM Internal Telephone Dialling
Unit with OGM Function
NOTE:
A SIM card must be installed in order to use
the GSM telephone dialling unit.
The internal telephone dialling unit is deactivated if no telephone numbers
have been entered and saved.
You can enter up to 10 individual telephone or mobile phone numbers of
contact persons, such as relatives, friends or neighbours. In the event of
an alarm, the internal GSM telephone dialling unit dials these phone num
bers automatically in the sequence they were entered (beginning with
memory location 0) and communicates the status via the voice messages
assigned to the respective sensors. In the case of an "engaged" signal or
no connection is possible, the next phone number is automatically dialled.
A total of three dialling cycles are completed!
The internal GMS telephone dialling unit is deactivated when a subscriber
called answers the call made and presses the numeric key
[1]
on his tele
phone or 3 dialling cycles have been completed.
NOTE:
Save as many phone numbers as possible.
This increases the probability of reaching a
contact person in the event an alarm is
triggered. If, for example, you only save two
phone numbers and both are engaged when
the alarm call is sent, the dialling cycle soon
comes to an end!
NOTE:
Do not forget to inform the contact persons
that they will be called by your alarm system
automatically if an alarm is triggered and agree
on a sequence of actions if the alarm is
triggered.
Memory locations 0-9 (buttons
to
) are available to enter up
to 10 phone numbers. Each phone number can be composed of up to 24
characters/digits. In addition, a name with up to 13 characters/letters can
be assigned to each phone number.
NOTE:
Unjustified requests for police, fire and rescue
services are liable for costs!
Save the phone numbers as follows:
1. Enter the device-specific Entry Code. Confirm it by pressing
.
2. Press the
button.
Location Key
appears in the display.
3. Select a memory location (button
-
). If you have not
yet stored a phone number,
Empty
appears as information in the
display. Confirm it by pressing
.
4. Enter the phone number including the access code. Confirm it by
pressing
.
5. Enter the name associated with the phone number. Confirm it by
pressing
.
6. Press
to exit from the menu.
