Installation
Giu
OPERATING
INSTRUCTIONS
11
Page
Preparing and Connecting the Base Unit
Power socket
RESET
Power
adapter plug
DC 6 V
"
RESET
Int Ext
Ext. Ant
SIM card
Antenna
switch
1. Use a screwdriver to loosen the screw in the battery and connection
socket compartment on the underside of the base unit.
2. Remove the lid from the battery and connection socket compartment.
3. Slide the SIM card holder to the left to unlock it (A).
4. Pivot the holder up and insert the SIM card in the holder (B).
5. Pivot the holder with the SIM card back and slide the holder to the
right to lock it (C)
LOCK
OPEN
LOCK
OPEN
A
B
C
6. Insert three AAA alkaline batteries in the battery compartment (pay
attention to correct polarity).
7. If the alarm system is to be operated without the external antenna
(option), the antenna switch must be switched to the left and set to
Int
.
DC 6V
"
RESET
Int Ext
Ext. Ant
Antenna switch
8. Connect the power adapter plug to the base unit.
9. Replace the lid on the battery and connection socket compartment.
10. Replace and tighten the screw.
