23
O
LYMPIA
P
RO
H
OME
SETTING UP THE BASE UNIT
Deregistering Sensors
If a sensor is no longer required, you can deregister that
sensor from the base unit.
1
Select the
Review menu option.
2
Select the sensor you wish to deregister.
3
Press the
E
key. The display shows
Delete?.
4
Confirm by pressing
O
.
Renaming Sensors
You can rename any of the registered sensors in order to
adapt it to your own individual needs.
1
Select the
Review menu option.
2
Confirm by pressing
O
.
3
Select the required sensor.
4
Confirm by pressing
O
.
5
Press the
E
key to delete the sensor name.
6
Enter a name for the sensor.
7
Confirm by pressing
O
.
8
Press the
C
key.
Individual Voice Message
An individual outgoing voice message can be recorded for
each sensor (door/window contact, smoke detector, etc.).
Keep the message short (< 4 sec.).
The standard message is replaced by your individual
voice message and played when the telephone unit is
activated.
1
Select the
Review menu option.
2
Confirm by pressing
O
.
3
Select the required sensor.
4
Confirm by pressing
O
.
5
The cursor flashes at the end of the sensor name.
You can rename the sensor (see Section
Renaming
Sensors on Page 23
).
6
Confirm by pressing
O
.
7
The display shows
Voice Record
. Confirm by press
-
ing
O
.
8
Speak your message for the selected sensor. Keep
the message short (< 4 sec.).
9
Confirm by pressing
O
to end the recording
process. Your individual voice message is played
back.
If you no longer like the voice message recorded,
you can repeat the process.
