OL3021/OL3022 User Manual
32
No CID
There is no CID information.
Note
: For records that have a total number of characters and digits exceeding the storage capacity, part of the data will be
truncated.
Pressing
UP
displays the previous record in the Caller ID list. At the beginning of the Caller ID List, pressing
UP
will go to
the last record.
Pressing
DOWN
displays the next record in the Caller ID list. At the end of the Caller ID List, pressing
DOWN
will go to
the top of the list.
Pressing
RIGHT
once will delete the current displayed record.
Pressing and holding
RIGHT
for 2 seconds during Caller ID browsing will display:
DELETE ALL?
Pressing
RIGHT
again will delete all CID records.
If the
RIGHT
key is not pressed for 10 seconds, the InfoGlobe will return to the Caller ID review mode
12 Setting Timer On/Off
The unit can be programmed to turn on and off at a set time; e.g. turned off at 10:30pm and turned on at 6:00am.
1. Press
SELECT
to enter the menu. Press
UP
or
DOWN
and scroll to
SET ON/OFF TIME
.
2. Press
SELECT
again. The current setting will be shown, e.g.
ON:HH:MMTT OFF:HH:MMTT
3. The
hour
setting
HH
for the ON time will be blinking. Use
UP
or
DOWN
to select the hour. If you are in 12-hour
mode, make sure you have the correct hour programmed (am or pm)!!!!! If you are in 24-hour mode, am/pm is not an
issue.
4. Use the RIGHT key to move to the minute location
MM
.
5. Use
UP
or
DOWN
to set the desired minute.
Use the RIGHT key to move to the locations for setting the ‘
Timer OFF
’ time in the same manner as above.
6. Confirm the setting by pressing
SELECT
.
Note
: Caller ID information will not be received when the InfoGlobe is turned off.
13 Troubleshooting the InfoGlobe
1. There is no rotation and display after plugging into an electrical outlet.
Ensure that the AC adapter is plugged in properly and batteries are installed properly.
2. There is no Caller ID information being received.
Caller ID is a subscription service from your local telephone company. Ensure that telephone cord is plugged in
correctly.
3. There are sounds of vibration coming from base.
Vibrations coming from the Info Globe are normal. However, check that the device is standing firmly on a level surface
and that there are no other objects close to the unit that may be producing the sound.
4. Floating display looks faint.
Check that AC adapter has been plugged in properly. Place unit against a dark background to obtain maximum