Operation
22
G
►
An acoustic signal is issued.
►
Arrows at the bottom of the display indicate the output side.
2. Press and hold the
ON/OFF
button to switch the device off.
Switch the device off if it will not be used for a longer period. The data
displayed is not necessarily saved. End the working processes in good time
or connect the device to an external power supply.
Preparing Bank Notes
Pay attention to the following points to prevent malfunctions:
1. Check the batch of bank notes for paper clippings, paper clips, rubber
bands and other foreign bodies and remove them before inserting the
bank notes in the machine.
2. Do not insert any damaged bank notes.
3. Smooth out any creased and folded bank notes before inserting them.
Inserting Bank Notes
1. Lay the bank notes individually in the tray on the input/output side with
the short side at the front.
►
The bank notes are drawn in and controlled automatically.
►
A short acoustic signal is issued and the LED lights up blue.
Pay attention to the output side selected.
If a bank note is inserted the wrong way around, detected as suspicious or
not detected, the LED lights up red and three short acoustic signals are
issued. The bank note is rejected and returned to you.
Wait until the bank note controlled has been fully ejected from the device and
remove it before inserting the next bank note to be controlled.
The best results are achieved after a warm-up phase of 3 minutes. Bright ambi-
ent light can affect the sensor and falsify results.
Summary of Contents for NC 375
Page 107: ......
Page 108: ...V 1 15 2 08 2023 ID 947730375...
