Olympia MEMO 99II, Operating Instructions Manual, Page: 35 / 138

B
A
C
D
Operation
35
Press the RECORD/STOP button,
the recording icon lights up and the
time indicator for the current recor-
ding appears. The LED lights up
red. Speak into the microphone in-
tegrated or connect an external mi-
crophone to the MIC jack. The de-
vice begins to record the moment you start to speak. If recording is
interrupted, the red LED flashes until recording is resumed. Press the RE-
CORD/STOP button again to end recording.
NOTE:
The first noise activates the recorder and it is possible it will not be
recorded.
The device does not interrupt recording should the volume of the speaker
change.
Recording is interrupted following 2 seconds silence.
For information on continuous recording, refer to Page 33.
A distance of approx. 10 cm from the device is considered reasonable for
recording at a normal volume (speaking).
Playing messages
Switch the device on, activate
Standby mode and press the FILE/
REPEAT button to select a file (A,
B, C, D).
Press the UP or DOWN button to
select the required messages. The
message number and length ap-
pear in the display.
GB