Olympia Memo 66, Manual Instruction

Page: 10 / 34

18 19
Set-up mode
In Set-up mode, you can set various
functions on the recorder.
To enter Set-up, make sure the recorder
is in stop mode (not recording or playing
back messages). Then press and hold
the Jog dial for two seconds.
The first display shows the amount of
available time left (REMAIN) for recor-
ding in the record mode that is displayed
in the top left corner. This REMAIN screen
is also used to change the recording
mode. By rotating the Jog dial up or
down, you can scroll to the other functi-
ons VOX and BEEP.
To change the record mode:
Press the Jog dial while in the REMAIN
screen. You can then scroll between the
record modes SP, EP and LP by rotating
the Jog dial. To set a mode, press the Jog
dial when the desired mode is displayed
in the top left corner. The available time
left for recording is displayed at the bot-
tom. The recorder then automatically
returns to normal operation.
To change the VOX mode:
When VOX, or voice activated recording,
is set to on, the recorder will stop recor-
ding when it detects several seconds
of silence. It resumes recording automati-
cally when a voice is detected again.
In Set-up, rotate the Jog dial to scroll to
the VOX display and select it by pressing
the Jog dial. Rotate the Jog dial to
toggle between VOX on and VOX off,
then press the dial to confirm the setting
you want. The recorder then automatical-
ly returns to normal operation.
To change the BEEP mode:
When BEEP is activated, a confirmation
tone will be heard.
In Set-up, rotate the Jog dial to scroll to
the BEEP display and select it by pressing
the Jog dial. Rotate the Jog dial to
toggle between BEEP on and BEEP off,
then press the dial to confirm the setting
you want. The recorder then
automatically returns to normal operati-
on.