background image

Congratulations 

on your purchase of the 

Olympia RG245 Cree

®

 XP-G LED 

high-

performance, high durability flashlight. The 

Olympia brand is synonymous with integrity. 

Our word is our bond. As a result, this product is 

designed to provide you with the best possible 

functionality. Its innovative Cree

®

 XP-G LED 

technology is geared for optimum effectiveness 

and high efficiency. Its ability to endure rugged 

use is enabled by the aircraft-grade aluminum 

with premium type III hard anodized anti-abrasive 

finish. This represents the industry’s top tier in 

durable finishes. It is lightweight and compact 

in design making it a great option for portability. 

Use it in any situation - hunting, hiking, camping, 

caving, general household, recreational activities, 

rugged sports, industrial worksite or emergency 

situations. Please take a few moments to read 

this user guide to ensure that you get the best 

performance and years of trouble-free use.

Product Description

Battery Installation

1.  Unscrew the tail switch cap and insert 

1xCR123A Lithium (non-rechargeable) or 

1x16340 Li-ion (rechargeable) battery*. The (+) 

terminal on the batteries should face toward 

the flashlight’s head.

2. Replace the tail switch cap and be sure to 

tighten snugly, but do not over tighten as this 

could strip the threads in the cap. Turn on the 

flashlight as indicated in any of the options 

listed in the table that follows. 

Note: If the tail 

cap is not tightened snugly, the flashlight 
will not turn on.

3. When the battery life is nearly depleted, your 

flashlight will blink to indicate new batteries  

are needed.

*All batteries are sold separately

Flashlight Operation

Your 

Olympia RG245 Cree

®

 XP-G LED

 high-

performance, high durability flashlight has a 

push-button tail switch for on/off operation and is 

equipped with 1) Momentary and 2) Continuous 

light options. It also has 5 illumination light modes 

to suit your varied needs. See table instructions 

that follow to access these functionalities:

Olympia RG245
CREE

®

 XP-G LED  

Flashlight

User Guide

Lighting Operation Modes

Momentary-on 

Lighting

Press the push-button tail switch 

half-way to activate the light 

momentarily.

Continuous 

Lighting

Press the tail switch push-button to 

completely turn on the flashlight. 

The light will stay on until the push-

button is turned off.

Lighting Modes

There are five types of light output:

High

Middle

 

Low

Strobe

SOS

Press the tail push-button to switch 

to each mode

Accessing the 5 Lighting Modes

High Beam

Press the push-button tail  

switch once

Mid

Press the push-button tail  

switch twice

Low Beam

Press the push-button tail  

switch 3 times

Strobe

Press the push-button tail  

switch 4 times

SOS

Press the push-button tail  

switch 5 times

Memory function

Your 

Olympia RG245 Cree

®

 XP-G LED

 

high-performance, high durability flashlight 

automatically memorizes the last light setting/

mode used when the flashlight next is turned on. 

i.e., after being in any one of the five light settings 

(High

Middle

Low

Strobe

SOS) for 3 

seconds, the last one used will be memorized.

Maintenance and Precautions

1.  Do not disassemble the sealed head. Doing 

so can cause damage to the flashlight and will 

void the warranty. 

2. Use high-quality batteries or you run the risk 

of the flashlight being damaged by electrolyte 

leakage or battery breakage.

3. If the flashlight will not be used for a long time, 

remove the batteries to avoid damage caused 

from battery leakage.

4. An additional battery type that can be used in 

this flashlight is 1x16340 Li-ion (rechargeable). 

WARNING: This flashlight has been 
tested with a 1xCR123A Lithium (non-
rechargeable) battery to ensure maximum 
performance. While the other battery type 
mentioned can be used, the performance 
of the flashlight may be reduced. Do 
not mix battery chemistries under any 
circumstances. This can cause rupture or 
leakage, resulting in personal injury or 
property damage.

5. Replace batteries with the size and type 

specified in the battery Installation instructions. 

Remove all used batteries from the device at 

the same time, then replace them with new 

batteries of the same size and type.

6. Do not recharge a battery unless it is 

specifically marked “rechargeable.” Attempting 

to recharge a normal battery could result in 

rupture or leakage.

7.  Lubricate the O-rings regularly using a 

Q-Tip

®

.  Apply a small dab of silicone grease 

or petroleum jelly to the contacts to prevent 

corrosion. Doing so will keep the flashlight 

properly sealed against water. If the O-rings are 

damaged after prolonged use, replace them.

Switch

Tail

Cap

Clip

Lanyard

Hole

Body

Head

All manuals and user guides at all-guides.com

all-guides.com

Reviews: