Operating Instructions
CM 840/842 Cash Register
Olympia 4.01 2007(Rev-A)
Page 8
All Rights Reserved
1.5
Control
lock:
OFF
PRG mode
(programming)
S – mode
not labelled
(Service mode)
Registration mode
(recording)
X - Print report
(view)
Z - Print report
(incl. deletion)
Note:
Key lock position S is not marked on the lock
.
1.6
Clerk
system:
C01
The clerk system must be activated (refer to Programming Instructions).
Before a transaction can be entered, clerks must log in using their number and press the Clerk key.
In addition, it is possible to assign a password for each clerk.
If a password has been set up and the clerk logs in, 3 small zeros appear in the display.
Enter the 3-character code at this point, 0.00 appears in the display and the clerk is logged in.
If the PASSWORD is entered incorrectly, error code E-11 appears.
Press the
CLEAR
key and then enter the correct PASSWORD
.
1.7
Manager password system
The system enables the assignment of two manager PASSWORDS. This results in access being restricted for:
1. the functions with the key in position "Z" (reports with subsequent deletion),
2. the functions with the key in position "S/PRG" (programming).
A password is composed of four characters and the log in process is analogue to that described above. In addition, the
following transactions can be restricted in PRG Mode:
•
Restriction of transactions in X mode
•
Restriction of transactions in Z mode
•
Restriction of "P/O" transactions
•
Restriction of "REFUND" transactions
•
Restriction of "VOID" transactions
•
Restriction of "NO SALE" transactions
Clerk code is displayed
Clerk symbol is displayed
