29
4.1 Function
switch
and
indicator
elements
1
Function switch position
for lamination foil with a thickness of 100 or 125 mic
7
2
Function switch position
for lamination foil with a thickness of 60 or 80 mic
2
3
Function switch position
for cold lamination
4
POWER
indicator
5
READY
indicator
4.2 Cutting
head
1
Setting lock
2
Rotating knob to set the type of cut
7 mic = abbreviation of the word micrometer ( m). 1 micrometer is one thousandth of a
millimetre.
1
2
3
4
5
2
1
1
3
1
3
30
5 Starting
Up
Place the device on a stable, level surface.
Ensure that the On/Off switch is in the
OFF
position before connecting
the laminator to the mains power supply.
Attention:
Check that the voltage specifications of the device
correspond to that of your power supply network (220 - 240 V, 50 Hz).
Insert the power plug in an easily accessible, standard power socket.
The
POWER
indicator lights up blue.
Safety note:
The power socket must be in the immediate vicinity of
the device and easily accessible. This enables you to disconnect the
device from the power supply quickly in an emergency.
POWER
POWER
30
