Seite 23
Regular Maintenance and Service
Removing Deposits and Residual Adhesive
Adhesive and other residues on the rollers can impair the lamination result.
Remove these at regular intervals and whenever the lamination result is not
as good as expected.
1.
Switch the On/Off switch
5
to
ON
.
CAUTION!
Risk of burns due to hot machine surface! During
the laminating process, the machine surface heats up. Do not
touch the machine surface during the laminating operation.
Wait a few minutes after laminating until the laminator has
cooled down before you touch it.
2.
The drive motor for the rollers starts up. The optimum operating
temperature is reached after 3 to 4 minutes.
The temperature control indicator
2
lights up red continuously.
CAUTION!
Risk of burns through hot residual laminated
material. When the paper is ejected after the cleaning
process, it can contain hot residual material. Only remove the
ejected paper holding it at the cooled end.
3.
Fold a sheet of paper and feed it into the infeed
1
of the laminator
with the folded edge first and keeping it straight. Residual adhesive is
removed and taken up by the paper when ejected.
4.
Repeat the process with a new sheet of paper until the paper comes
out clean.
G
