Seite 22
If Problems Occur
If Problems Occur
Clearing Pouch Jams
If you inadvertently feed the laminating pouch into the infeed
1
at an
angle, or if the rollers are soiled with too much residual adhesive, or if you
try to laminate unsuitable materials, laminating pouches can jam inside the
laminator.
1.
Switch the ON/OFF switch
5
to
OFF
.
2.
Disconnect the power plug
4
from the power socket.
CAUTION!
Risk of burns through hot laminating pouch.
When the laminating pouch is ejected after lamination, it is
extremely hot. Only remove the ejected lamination pouch
holding it at the cooled end.
3.
Carefully pull the laminating pouch out of the infeed
1
of the
laminator.
After a pouch jam, always clean the laminator. Clean the laminator
as described in the section
Regular Maintenance and
Service
.
Regular Maintenance and Service
Clean the laminator at regular intervals.
1.
Before cleaning, disconnect the power plug
4
from the power socket.
2.
Wait until the laminator has cooled down. Information on cooling
down times is provided in Section
Technical Data
.
Note
Risk of damage to the laminator through aggressive
cleaning agents. Do not use any solvents or cleaning agents.
3.
Use a slightly damp, lint-free cloth to clean the surface of the lamina
-
tor.
G
