9. Miscellaneous
OPERATING
INSTRUCTIONS
16
Page
Filter
You can programme a filter function for your telephone whereby the ringing
tone for incoming calls is deactivated for a specific time (lunch break,
important meeting, etc.).
1. Press the
È/Ç
button.
2. The message
Filter start
appears in the display.
3. Press the
_/`
buttons to set the hour.
4. Confirm the selection by pressing the
#/I
button.
5. Press the
_/`
buttons to set the minute.
6. Confirm the selection by pressing the
#/I
button.
7. The message
Filter stop
appears in the display.
8. Press the
_/`
buttons to set the hour.
9. Confirm the selection by pressing the
#/I
button.
10.Press the
_/`
buttons to set the minute.
11.Confirm the selection by pressing the
#/I
button.
The filter is programmed for the set period of time.
12.The message
FILTER
appears in the display.
13.Press the
È/Ç
button to switch the filter off.
Filter Properties
You can assign a filter property to the existing entries in the call list.
1. Press the
_
or
`
button to open the call list.
2. Press the
_/`
buttons to select a phone number.
3. Press the
Ñ/Ê
button.
4. The message
Norm Vip Rej Esc
appears in the display.
5. Press the
_/`
buttons to switch a property off.
6. Press the
Ñ/Ê
button again.
7. Press the
S
button to return to Standby mode.
The property selected determines the behaviour when the filter is switched
on.
Tip: Entries which are not assigned have the property ESC.
NORM:
When the filter is switched on, this call is signalled by 2 rings.
Entries are not overwritten when the memory is full.
VIP:
When the filter is switched on, this call is signalled by 4 rings. Entries
are not overwritten when the memory is full.
REJ:
When the filter is switched on, this call is not signalled at all. Entries
are not overwritten when the memory is full.
ESC:
When the filter is switched on, this call is not signalled at all. Entries
are automatically overwritten when the memory is full.