![background image](http://html2.mh-extra.com/html/olympia/4210/4210_operating-instructions-manual_4508726015.webp)
6. Telephoning
OPERATING
INSTRUCTIONS
11
Page
Changing the Loudspeaker Volume
Press the
Ä
button while the loudspeaker is switched on in order to
adjust the volume. There are 4 levels available for selection.
Compiling the Call Time
Compiling of the call time is started approx. 5 seconds after the call has
been taken or the phone number dialled. Even if the phone number dialled
is engaged, the phone number and duration of the call are stored in the
outgoing call memory.
Muting the Microphone
While a call is in progress, you can press the
È/Ç
button to switch off the
microphone. Press the button again to resume the call.
Using the
R
Button
If your telephone is connected to a PABX system, the
R
button is used
during a call to enable consultation with other subscribers and/or to forward
a call to them.
This function is also used by network operators to provide customers with
various other services. For details, contact your telephone network
operator.
1. Pick up the receiver or press the
<
button to make the call.
2. During the call, press the
R
button and dial the phone number of another
subscriber in order to consult with him or forward the call to him.
3. Press the
R
button in order to take the initial call back following
consultation
or
4. Replace the receiver to forward the call to the subscriber contacted.
Tip: The above information could vary according to the PABX system
used. Please read the information provided in the manuals
supplied with your PABX system.
Entering a Dialling Pause (
É
)
If the telephone is connected to a PABX, it may be necessary to enter a
dialling pause. Press the
É
button after entering the digit following which a
pause is required, e.g. 0 for an outside line (0P....). A
É
then appears in the
display to represent the pause. A pause can also be programmed for
entries in the phone book.
Dialling Phone Numbers from the List of Incoming
Calls
The telephone automatically saves information on the last 44 incoming
calls. Proceed as follows to dial a phone number from this call list:
1. Press the
_
or
`
button to open the call list.
2. Press the
_/`
buttons to select a phone number.
3. Pick up the receiver or press the
<
button to dial the number.
Tip: If a call from the same phone number is received several times,
only the last call and time is displayed.