background image

WWW.OLYMPIA-TOOLS.CO.UK  |  

7

 AFTER SALES SUPPORT

   |   +44 (0) 1904 727512

6  

|  20V LI-ION CORDLESS COMBI DRILL 

SAFETY WARNINGS - 

DRILL

1.  

Use auxiliary handle(s), if supplied with the tool.

 

Loss of control can cause personal injury.

2. 

 Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 

may contact hidden wiring.

 Cutting accessory contacting 

a “live” wire may make exposed metal parts of the power 

tool “live” and could give the operator an electric shock.

SAFETY INFORMATION

SAFETY WARNINGS - 

BATTERY PACK

1.  

Do not dismantle, open or shred cells or battery pack.

2.  

Do not short-circuit a battery pack. Do not store battery 

packs haphazardly in a box or drawer where they 

may short-circuit each other or be short-circuited by 

conductive materials.

 When battery pack is not in use, 

keep it away from other metal objects, like paper clips, 

coins, keys, nails, screws or other small metal objects, 

that can make a connection from one terminal to another. 

Shorting the battery terminals together may cause burns 

or a fire.

3.  

Do not expose battery pack to heat or fire. Avoid 

storage in direct sunlight.

4. 

 Do not subject battery pack to mechanical shock.

5.  

In the event of battery leaking, do not allow the liquid 

to come into contact with the skin or eyes.

 If contact 

has been made, wash the affected area with copious 

amounts of water and seek medical advice.

6.  

Seek medical advice immediately if a cell or battery 

pack has been swallowed.

7. 

Keep battery pack clean and dry.

8.  

Wipe the battery pack terminals with a clean dry 

cloth if they become dirty.

9.  

Battery pack needs to be charged before use. 

Always refer to this user guide and use the 

correct charging procedure.

10. 

 Do not maintain battery pack on charge when not 

in use.

11. 

 After extended periods of storage, it may be necessary 

to charge and discharge the battery pack several times 

to obtain maximum performance.

12.  

Battery pack gives its best performance when it is 

operated at normal room temperature (20 °C ± 5 °C).

13. 

 When disposing of battery packs, keep battery packs 

of different electrochemical systems separate from 

each other.

14. 

 Recharge only with the charger specified by 

manufacturer.

 Do not use any charger other than 

that specifically provided for use with the equipment. 

A charger that is suitable for one type of battery pack may 

create a risk of fire when used with another battery pack.

15. 

 Do not use any battery pack which is not designed 

for use with the equipment.

16. 

Keep battery pack out of the reach of children.

17. 

 Retain this user guide for future reference.

18.  

Remove the battery from the equipment 

when not in use.

19. 

Dispose of properly.

SAFETY WARNINGS - 

BATTERY PACK CHARGER

 WARNING!

Read all safety warnings and instructions.

 Failure to follow 

warnings and instructions may result in electric shock, fire 

and/or serious injury. 

Save all warnings and instructions for future reference

This appliance can only be used by children aged from 8 years 

and above and persons with reduced physical, sensory or 

mental capabilities or lack of experience and knowledge if 

they have been given supervision or instruction concerning 

use of the appliance in a safe way and understand the hazards 

involved. Children shall not play with the appliance. Cleaning 

and user maintenance shall not be made by children without 

supervision. If the supply cord is damaged, it must be replaced 

by the manufacturer, its service agent or similarly qualified 

persons in order to avoid a hazard.

1.  Before charging, read the instructions.
2.   After charging, disconnect the battery charger from 

the supply mains. Then remove the chassis connection 

and then the battery connection.

3.  Do not charge a leaking battery.
4.   Do not use chargers for works other than those 

for which they are designed.

5.   Before charging, ensure charger matches  

the local AC supply.

6.  For indoor use, do not expose to rain.
7.  The charging device must be protected from moisture.
8.  Do not use the charging device in the open.
9.  Do not short out the contacts of battery or charger.
10.  Respect the polarity “+/-“ when charging.
11.  Do not open the unit and keep out of the reach of children.
12.   Do not charge the batteries of other manufactures or 

ill-suited models.

13.   Ensure that the connection between the battery charger 

and battery is correctly positioned and is not obstructed 

by foreign bodies.

14.   Check battery charger’s slots are free of foreign objects 

and protect against dirt and humidity. Store in a dry  

and frost-free place.

15.   When charging batteries, ensure that the battery charger 

is in a well-ventilated area and away from inflammable 

materials. Batteries can get hot during charging. 

Do not overcharge batteries. Ensure that batteries 

and chargers are not left unsupervised during charging.

16.   Do not recharge non-rechargeable batteries, as they  

can overheat and break.

17.   Longer life and better performance can be obtained 

if the battery pack is charged when the air temperature 

is between 18ºC and 24ºC. Do not charge the battery 

pack in air temperatures below 4ºC, or above 40ºC. 

This is important as it can prevent serious damage 

to the battery pack.

18.   Charge only battery packs of the same model 

provided by manufacturer and of models 

recommended by manufacturer.

SAFETY INFORMATION  

|

  SAFETY WARNINGS - BATTERY PACK CHARGER

SAFETY INFORMATION  

|

  SAFETY WARNINGS - DRILL/BATTERY PACK

SAFETY INFORMATION

SAFETY INFORMATION

IMPORTANT: 

To reduce risk 

of injury, please read this 

user guide before assembly.

IMPORTANT: 

To reduce risk 

of injury, please read this 

user guide before assembly.

IMPORTANT: 

To reduce risk 

of injury, please read this 

user guide before assembly.

Summary of Contents for CD20VLI












Reviews: