background image

OLYMPIA TOOLS INTERNATIONAL, INC.

Tel. 626-336-4999 / Fax. 626-336-489 / Web. www.olympiatools.com

Page 1

Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. 

Keep this manual in a safe and dry place for future reference.

Save This Manual

In this manual, on the labeling, and all other Information provided with this product:

Safety Warnings

DANDER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. 

Obey all safety messages that follow this symbol to avoid possible injury death.

WARNING! Read all instructions. Failure to follow all instructions listed below may result in fire, serious injury and/ or DEATH.

The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. 

It must be understood by the operator that common sense and caution are factors which cannot be built into this product, 

but must be supplied by the operator.

DANGER

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

WARNING

CAUTION used with the safety alert symbol, indicates a hazardous situation which, 

if not avoided, could result in minor or moderate injury.

CAUTION

CAUTION ,without the safety alert symbol, is used to address practices not related to personal injury.

CAUTION

NOTICE is used to address practices not related to personal injury.

NOTICE

SAVE THESE INSTRUCTIONS

Summary of Contents for 86-337



















Reviews: