Page 3 from 4
922044006_09_024
In recess mounting installation the
required opening is 280 x 50 mm.
The material must withstand the
luminaires weight.
280
50
(*)
Maintained operation: The luminaire lights its
illumination source, when it is powered by the mains power
supply or not.
Non Maintained operation: The luminaire lights its
illumination source, only in power supply’s failure.
NOTE:
LED= Light Emitting Diode
LABELING EXPLANATION:
X:
Self contained
1:
Maintained
(*)
A:
Including test device
G:
Internally illuminated
*180:
3 hours duration
ATTENTION!!
To disconnect the panel’s cables, you have to power off the mains power supply and
disconnect the battery.
The light source contained in this luminaire shall only be replaced by the manufacturer, or his
agent, or a similar qualified person.
NOTE! The light source is non-user replaceable.
Placing the mounting springs
Α-3018
1
2
Place one part of the mounting spring
first and then the other one.
Place the edges of the mounting spring
as shown in picture.
1
2
Recess mounting
in suspended ceiling
A-3018
Mounting springs
for recess mounting
A-3018 mounting springs
Ceiling mounting
Wall mounting
Mounting methods
When the device is mounted externally it can use the A-1028 mounting box.