Page 5 of 5
923760200_09_001
Loading default settings:
In order to load default settings to the GR-7602 Wifi Gateway, follow the procedure below:
Press BT1 for more than 10s to load default values.
After 20 seconds, the device will establish a Mini AP to setup connection parameters (see
page3).
If you see a message regarding the page being unable to load, try resetting the device with BT1
for 2 seconds.
(Loading defaults does not restore SID and RF Channel values. In order to restore default values on
SID and RF Channel values use the GR-7600 software.)
Default settings:
•
Gateway technician menu code (webserver): 1000
• Gateway SID: 00000001
•
Gateway channel: 13 (869.525MHz)
• Mini Access Point Gateway IP: 192.168.0.50
WARRANTY
Olympia Electronics guarantees the quality, condition and operation of the goods. The period of warranty
is specified in the official catalogue of Olympia Electronics and also in the technical leaflet, which
accompanies each product. This warranty ceases to exist if the buyer does not follow the technical
instructions included in official documents given by Olympia Electronics or if the buyer modifies the goods
provided or has any repairs or re-setting done by a third party, unless Olympia Electronics has fully
agreed to them in writing.
Products that have been damaged can be returned to the premises of our
company for repair or replacement, as long as the warranty period is valid.
Olympia Electronics reserves the right to repair or to replace the returned goods and to or not charge the
buyer depending on the reason of defection. Olympia Electronics reserves the right to charge or not the
buyer the transportation cost.
HEAD OFFICE
72
nd
km
.
O
.
N
.
R
.
Thessaloniki-Katerini
P
.
C
. 60300
P.O.
Box 06
Ε
ginio Pierias
Greece
www.olympia-electronics.gr
[email protected]