Page 3 of 5
923760200_09_001
To access it, use the Wi-Fi device (PC/Laptop/smartphone) and join the “
WL Light WiFi
” network.
Once connected, type in the address bar of a web browser, the following page:
captiveportal.net
(or the IP: 192.168.0.50)
The following page should now
appear:
Apply the settings above and click “
Push
” button. Once the GR-7602 is configured, the
mini
Wi-Fi
AP will be terminated, then the device will
connect to the given Wi-Fi Network (LD7 1
blink/s). This
action may take up to a minute.
DANGER AC
High Voltage
Do not touch
parts/areas
other than
specified
UP: Button BT2 position
Technician password = 1000 (default)
SSID (network name) of the network to join
Target network password
Static IP address for the 290092
Network subnet mask
Network Gateway (router) IP Address
Network DNS Address (empty if not used)
Set DHCP always to OFF
Network security
Pc’s IP Address
Set mode to “Gateway”
Note: values in the fields above are examples and may differ to other networks.
Commissioning:
In order to setup the GR-7602 Wifi Gateway and create a new wireless emergency lighting network,
you will have to follow the following steps:
Establish a mini Wi-Fi Access Point on the GR-7602.
Connect to the mini Wi-Fi Access Point with a Wi-Fi device.
Enter the configuration page to setup Wi-Fi and Master PC connections.
Run the GR-7600 software to continue with commissioning - run Network Config. Wizard to
setup the wireless network for emergency lighting.
For further details see the instructions below:
Wi-Fi connection configuration:
In order for the GR-7602 to communicate with the PC, at least an active Wi-Fi network must be
present and the master (monitoring) PC must be accessible via this network. Activate (power supply)
the device. To connect the device to the existing Wi-Fi, you will need a device with Wi-Fi connectivity
(e.g. smartphone or laptop or tablet), that is set to automatic DHCP.
Setup connection via Mini Access Point
:
Open the front cover. Press for 2 seconds the button BT2 on the left part of the PCB. The GR-7602
now will establish a temporary mini Wi-Fi Access Point, named as “
WL Light WiFi
” without security
(Ld7 2 blinks/s) (see page 4 for LED6/7 indications).
