GR-750x series
Control panel for addressable emergency
luminaires
Document number: 923750400_09_007
Date: 3/5/2022
Page: 31 of 71
[31]
4.3 Point status
The status of the connected and registered points is displayed here (Figure 20, ref 3). If multiple points are in
a different status, the most important/serious one is displayed. The possible statuses are descripted below.
4.3.1 Charging/Fully charged status
Charging message means that at least one points in charging mode. Fully charged message means that all
points connected to the panel are fully charged. While the system is not in test, emergency, inhibit, off
command or cut off mode, the message
“CHARGING”
or
“FULLY CHARGED”
should be displayed on the
screen (Figure 20, ref 3).
4.3.2 Emergency status
The “
EMERGENCY
” message on the home screen (Figure 24, ref 1) indicates that at least one point is in
emergency mode and the exact number is displayed in the upper right corner of the relevant icon (Figure 24,
ref 2).
Figure 24
4.3.3 Function/Duration test status
The “
DURATION/FUNCTION TEST
” message on the home screen (Figure 25, ref 1) indicates that at least
one point is in function/duration test and the exact number is displayed in the upper right corner of the relevant
icon (Figure 25, ref 2).
Figure 25