Page
4 from
8
Mounting the lamp in suspended ceiling.
Step 1
Pass the battery pack into the ceiling then bend the springs, to get into the hole of the suspended
ceiling, as you can see to the next figure.
Set up the lamp to the suspended ceiling as it is shown bellow
(Required opening 110mm)
:
Step 2
Push up the luminaire, as shown in figure 2.
Step 3
Continue to push upwards until the lamp locks.
If you want to pull off the device,
put a flat blade
screwdriver, between the device and the ceiling.
Figure 2
Figure 3
Figure 1
Ø110mm
NOTE: The length of the battery pack cable is 70 cm.
CAUTION
:
Do not view directly with bare eyes.
230V
230V
230V
92329300
8
_09_00
2