Installation and Connection
1.
First, remove the retaining screw, place a flat blade screwdriver in the holes of the plastic hooks
and remove the plastic cover (Image 1).
2
.
Use the supplied mounting parts to install the siren’s base on the wall. Place the plastic plugs
and fasten the screws to the mounting holes
.
3
.
Place the
caps
and make a hole in the center using a small screwdriver.
Pass
through the
caps
the
cables to connect the device.
4.
Connect the
siren
as shown in
f
igure 2
(page 2). Similarly all s
irens
are connected in parallel
(the maximum number depends on the
panel
).
5.
Refit the plastic cover until the plastic hooks are securely attached (step 1) and fasten the
retaining screw (torque 0.6Nm).
6.
Test the device after installation.
9215
0
3
2
00_
0
9_01
0
Page
4
from
5
1
1
1
Image
1
2
Image
2
2
2
4
4
