Page 2 from
4
Preparation before use
Battery installation and considerations
Remove the seal from the battery contacts then put the battery in the battery holder according to Pic and
close the battery cover.
Note:
For the first use of the battery, need to charge it full. After the battery is stored for a long time
also need to charge it full, then the battery will achieve the best use effect.
Install the print paper
Use thermal paper with diameter 40mm and width 58mm.
1. Remove the seal on the printing paper.
2. Hold the side button of paper holder and open it.
3. Put the paper roll in like below.
4. Put out some paper and close the paper holder, tear up the excess paper.
Note:
Please take care of the paper roll direction, if opposite it
can not print the content.
927200002_09_001
