2
d.
Ergonomically designed neckrest with grips enabling easy tilting into position
•
By means of the grips, the customer can tilt the shampoo basin into the position most
comfortable for her.
e.
Cleaning ceramic parts
•
Rub dry with a soft cloth or microfibre cloth.
•
Stubborn spots and calcified deposits should be removed using a mild cleansing agent.
•
On no account should abrasive cleansers or solvents be used!
2.
Comfort chair
a.
Chair with electrically swivelling leg-support
•
The leg-support
(Fig. 3
) is operated by means of the 2-key remote
control
(Fig. 8)
.
•
Move the leg-support upwards by means of the
-key.
•
Move the leg-support downwards by means of the
-key.
•
The remote-control unit is secured magnetically to the right-hand side of the seat.
(Fig. 3)
b.
Seat with electrically-powered extending leg rest and vibro-massage function
•
The seat has a total of six vibration motors: two motors in the shoulder zone, two in the lumbar zone
and two in the leg rest.
•
You can use the multi-button remote-control unit
(Fig. 9)
to control both the leg rest and the vibro-
massage functions as follows:
0
If lamp is lit green, your unit is connected to power supply and is ready for use.
1
Massage motors in shoulder zone ON/OFF
2
Massage motors in lumbar zone ON/OFF
3
Massage motors in leg rest ON/OFF
4
Lamp lights up when massage motors in shoulder zone are operating.
5
Lamp lights up when massage motors in lumbar zone are operating.
6
Lamp lights up when massage motors in leg rest are operating.
7
Button to adjust massage intensity.
8
Button to adjust massage rhythm.
9
Button to select a massage program. The "Flat" program is selected by default when buttons
-
are pressed.
Program 1: "Flat" – The massage motors selected with
-
operate simultaneously at the
lowest intensity and speed level.
Program 2: Pressing button
starts the "Tap" program – the massage motors operate
alternately in the zones selected by
-
.
Program 3: Pressing button
a second time starts the "Wave" program – the massage
motors selected with
-
operate in a wave-like cycle with increasing and decreasing
intensity.
A
Lamp lights up green when buttons
and
are pressed. It goes out when the highest or
lowest level is reached.
B
Lamp lights up when the "Flat" program is activated.
C
Lamp lights up when the "Tap" program is activated.
D
Lamp lights up when the "Wave" program is activated.
E
"Stop" button switches off all massage functions.
F
Raise/lower leg rest
(Fig. 3).
Pressing the
button raises the leg rest to the required height.
Pressing the
button lowers the leg rest to the required height.
GB
