7
Package Contents
Check the package contents of the safe before you actually use the safe. If anything is missing or damaged, contact
our Service Department.
•
1x Safe
•
2x Emergency key
•
1x Emergency power supply
•
1x Shelf
•
4x AA LR6 batteries
•
4x Fixing screws
•
1x Instruction manual
Open the safe for the first time / Open the safe with the emergency key:
When opening the safe for the first time, it must be opened with the emergency key.
•
Remove the cover of the emergency lock
•
Insert the emergency key and turn it anticlockwise.
•
Do not let go of the key, otherwise it will return to its original position.
•
Turn the knob clockwise to open the door.
CAUTION: When finished, remove the emergency key and keep it in a safe place. !!!NOT IN THE SAFE!!!
Inserting the batteries
•
Open the door and remove the battery cover.
•
Insert 4 x AA LR6 batteries into the battery compartment.
Low battery level
You should replace all batteries when the display shows "LO-BAT".
ATTENTION: Replace the batteries by arranging them as indicated by the "+" and "-" signs.
Removing the batteries
Follow the steps below to remove the batteries.
Remove the battery compartment cover.
Caution! Danger of short circuit.
•
Remove batteries only with a non-conductive object, e.g. a wooden or plastic spatula.
Remove the batteries.
Replace the battery compartment cover.
Closing the door
•
Close the door of the safe
•
Turn the knob anticlockwise to close the door.
Open door with user code
•
Press "#" to activate the safe, the display shows " - ".
•
Enter your password (1 to 6 digits), each press results in a beep.
•
Press the "#" button to confirm, the display shows "OPEN".
•
Turn the knob clockwise and pull it outwards within 5 seconds, the door will open.
ATTENTION: The preset user code is "1234" and the preset master code is "123456"!
Open door with hidden user code
•
Press "#" once to activate the safe.
•
Then press "*" once before entering the password.
•
As you enter the code, it disappears from the display.
