Technical information
Maximum pressure
1 MPa
Recommended pressure
0,1 - 0,5 MPa
Maximum temperature of hot water
90°C
Recommended temperature of hot water
65°C
Check whether the installation of hot and cold water was done correctly.
Operation
To start the water flow and fluently adjust its rate, turn the handle vertically upwards.
To increase water temperature, turn the handle left, and to reduce – turn the handle
right. Positioning the handle on the extreme left results in the flow of hot water only,
while placing it on the extreme right – the flow of cold water only.
Care and maintenance
Flush with clean water and wipe with a dry, soft cloth.
For heavier deposits, it is recommended to use special tap cleaning agents, prefera
-
bly professional Oltens products from the NanoCare and NanoShine series.
Never use agents containing alcohol, disinfectants, solvents and strong bases.
Never clean the surface of the tap with rough cloths or cleaning agents containing
abrasive materials and acids..
Open
Close
On the left:
hot water
On the right:
cold water
