14.
Position rear
Window Wall Panel
into place on plywood floor. Butt both vertical wall studs of side
and rear walls together and attach with
3 - 2 1/2” screws
. Screw at the bottom, middle and top of
stud to secure properly.
Optional:
Small bead of
Caulk on wall
frame first.
Rear Window Wall
Side Solid Wall
15.
With the corner wall attachment complete, position a Rear
Solid Wall Panel With Extra
Vertical Studs
so bottom 2x3 wall framing is sitting flush with outside floor frame. Wall siding should
overhang floor by approximately 1/2”. Attach rear wall panel studs together as per
Step 14
.
2x3 wall framing flush with
outside of floor frame.
16.
Position the final Rear Panel on the floor
(
Window Wall Panel
). Position vertical wall
studs together and attach as per
Step 14
.
Important:
Do not
attach walls to floor
until
Step 26
Important:
Rear
Center Solid Wall
Panel has 3 studs.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 14
