47.
Position and attach
4D - Rear Corner
Filler Trim
with
5 - 1 1/2” Finishing Nails
per
piece as per
Step 46
.
Parts
4D - Rear Corner Filler Trim
(3/4” x 2 1/2” x 42”)
x 4
Hardware
N1 - 1 1/2” Finishing Nails
x 20 total
Gap will be
covered.
48.
Position
4E - Aluminum Door Tracks
on bottom of Front Soffits,
spaced approximately 3/8” from Door Header.
4Y - Extra Piece Lap Siding
can be used as a spacer for track. Tracks should meet at the center of the
door opening below middle rafter. Attach
with
8 - 1 1/4” Screws
per track.
Parts
4E - Aluminum Door Track
x 2
Hardware
S2 - 1 1/4” Screws
x 16 total
3/8” Gap between Track and Door
Header. Extra piece of lap siding
can be used as a spacer.
3/8”
Door
Header
Front Soffit
Tracks meet
in the middle
A wood clamp may be helpful
to hold the track in place while
attaching to Soffit.
Lap Siding
Note:
Aluminum track has pre-drilled
holes for screws which do not line
up with rafter ends.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 29
