28.
With Rafter Section correctly aligned, secure rafters to walls using
2 - 90° Metal Brackets
per side. Attach each brackets with
4 - 1 1/4” Screws
.
Screw into Wall Extension Framing at the rear and Wall Panel top framing at
the front. Complete both sides.
Hardware
Y2
- 90° Metal Bracket
x 4 total
S2
- 1 1/4” Screws
x 16 total
90° Metal Brackets
29.
With outside rafters properly secured, attach remaining interior rafters using
1 - 3” Screw
per rafter end at the front of the shed. Screw into rafters from inside of
Header on an angle.
Hardware
S4
- 3” Screws
x 7 total
30.
With outside rafters properly secured, attach remaining interior rafters using
1 - 3” Screw
per rafter end at the rear of the shed. Screw into rafters from inside of
Extender Wall Framing.
Hardware
S4
- 3” Screws
x 7 total
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 20