Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 6
3.
Carefully lift connected track up supporting
in the center. Place tight against post and
underneath pergola joists.
2 Ladders and an assistant
required now!
4.
Before attaching, confirm track is centered on mid post. Attach track with 1 - 1 1/4” Torx Screw on gap
end screwing up through the track into bottom of wood joist. On opposite end, attach track to post with
1 - 1 1/4” Torx Screw. Do not over tighten. Drill hole in track with 1/4” drill provided. At mid post, screw
track to post with 2 - 1 1/4” Torx Screws. Drill track again with 1/4” bit provided. Secure track
further with 3 - 1 1/4” Torx Screws screwing up through the track into bottom of wood joist. Pre-drill with
1/4” bit included in kit first. Complete both sides.
Gap
4 - 1 1/4” Torx Screws per
track. Pre-drill track first
with 1/4” bit included.
1 1/4” Torx Screws
1 1/4” Torx Screw
