1.
With a Step Ladder, install
Part A - Canopy Lowering Cleats - 3 pcs Total. (2 pcs. @ 1 1/2” x
2 1/2” x 36”)
&
(1 pc. @ 1 1/2” x 2 1/2” x 63 1/2”)
. Attach with
2-3 - 4” Torx Screws.
Cleats will
lower the canopy on one side and drain water off the fabric so it doesn’t collect excessively. Decide
best side for water to drain for your situation. Position cleats underneath pergola joists or blocking as
shown above and attach. Cleats are pre-drilled for Torx Screws.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 5
2.
Locate
Part B’s - 120” long (2 Pcs)
and 115
1/2”
long Canopy Tracks (2 Pcs)
as well as
4” long x
1/4” diameter Plastic Track Connector (2 Pcs).
Push connector into track profile approximately 2”
then push tracks together. Complete 2 sets of tracks.
4” Plastic Track Connector
120”
Track
Canopy Tracks
Plastic Connector helps align
Track and is not structural.
Carefully support connected
track when lifting.
120” long
115 1/2” long
115 1/2”
Track
Counter sunk
drill holes.
