64.
Make sure Door Panel is aligned
evenly at top and edge. When aligned
correctly, attach top and middle hinges to
narrow trim with 2” black screws.
65.
Place second Door into position and attach as per
Step 63
. Make sure Doors can open and shut correctly
prior to completely securing all hinge screws.
63.
Now secure the Double Doors. Starting with
Right Side Door
, position so there is a 1/2” gap on
bottom, and approximately 3/8” on the side. Use a
spare piece of siding or shingle to shim door in place
at the bottom. Using 2” black screws, secure bottom
hinge to Door Trim.
Hint:
Do not attach all the 2”
screws until both doors are positioned correctly. You
can use a Screw Driver to tighten screws completely
so you don’t over tighten.
Bottom of Door
3/8” gap on
side, 1/2” gap
at bottom.
2” Black Screws
Important -
Drill Pilot holes to prevent splitting.
62.
With Hinges attached, position doors in opening. You will need some assistance to hold
doors in place.
Hint:
Use Shim
Shingle or extra
piece of siding to
help space Doors
at top and bottom.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 29
