Thank you for purchasing our 8x4 GardenSaver Double Door Shed.
Please take the time to identify all the parts prior to assembly.
Parts List:
A. Floor Section
1 - 45 ½” x 75” -
Large Floor Frame
(2 Joists unattached)
1 - 45 ½” x 21” -
Small Floor Frame
(2 Joists ATTACHED)
2 - 1 ½” x 3 ½” x 71 ¾” -
Floor Joists
(Steps 1 - 2)
5 - 1 ½” x 3 ½” x 45 ½” -
Floor Runners
(Steps 3 - 5)
1 - ⅝” x 45 ½” x 75” -
Plywood Flooring
1 - ⅝” x 45 ½” x 21” -
Plywood Flooring
(Steps 6 - 8)
B. Wall Section
4 - 1 ½” x 2 ½” x 45 ½” -
Wall Plates
4 - 45 ½” x 75” -
Wall Panels
2 - 12” x 73” -
Narrow Wall Panels
(Steps 9 - 18)
2 - 2” x 3 ½” x 6 ½” -
Door Headers - Short (Dado on edge)
1 - 2” x 3 ½” x 78” -
Door Header - Long
Dado cut on edge- Aluminum Support Strip Attached
2 - 1 ½” x 3 ½” x 73” -
Door Jambs - Vertical
(Steps 19 - 21)
2 -
Top Triangular Siding Pc for
Angle Wall Extendors (L/R)
2 - 4
5 ¼
” -
Angle Wall Extendors (L/R)
2 - 9” x 45 ½” -
Wall Extendors
(Steps 22 - 28)
1 - ¾” x 3 ½” x 70” -
Horizontal Wall Cleat
1 - ¾” x 3 ½” x 21” -
Horizontal Wall Cleat
(
Step 29)
C. Rafter & Roof Section
6 - 1 ½” x 2 ½” x 54” -
Rafters
1 - 3” x 2
½
” x 54”
- Rafter - angle cut ends (3/4” cleats attached on sides)
2 - ½” x 3 ½” x 48” -
Front Soffits
2 - ½” x 3 ½” x 48” -
Rear Soffits
(Steps 31 - 36)
1 - ⅝” x 4” x 53
¾
”
Center
Plywood for Roof
2 - ⅝” x 48” x 21
¾
”
Small
Plywood for Roof
2 - ⅝” x 48” x 32”
Large
Plywood for Roof
(Steps 37 - 41
)
2 -
Rafter/Facia Nailing Plates
- ¾” x ¾” x 51”
(Step 42)
D. Miscellaneous Section
(Skirting, Trim, Door, Facia & Misc. Parts
)
6 - ¾” x 4 ½” x 45
¼
” -
Bottom Skirting
(Bevel Siding)
(Steps 43 - 46)
8 - ⅞” x 2 ½” x 36” -
Corner Filler Trims
2 - ⅞” x 2 ½” x 10” -
Front Center Corner Filler Trims
(Steps 47 - 49)
2 - ½” x 3 ½” x 77 ½” -
Vertical Door Trims
(Steps 50 - 51)
2 - ½” x 5 ½” x 79” -
Rear Corner Trims
2 - ½” x 5 ½” x 88 ¾” -
Front Corner Trims
2 - ½ x 2 ½” x 80” -
Side Rear Corner Trims
1 - ½ x 2 ½” x 79” -
Rear Middle Trim
2 - ½” x 2 ½” x 88 ¾” -
Side Front Corner Trims
(Steps 52 - 55)
1 - ½” x 2 ½” x 88 ¼” -
Horizontal Door Trim
1 - ½” x 2 ½” x 8 ⅝” -
Front Middle Trim
(Step 56)
2 - 31
½”
x 72” -
Full Doors
(Steps 57 - 61)
2 - ½” x 4” x 54 ⅛” -
Side Facia
(Angle Cut Ends) - reverse
4 - ½” x 4” x 50 ½” -
Front and Rear Facia
(Steps 62 - 64)
2 -
Detail Facia Plates
(4” high)
(Step 65)
2 -
½”
x
½”
x 28 ⅞” -
Upper Interior Door Trims
4 -
½”
x
½”
x 35 ⅞” -
Side
Interior Door Trims
(Steps 66 - 67)
1 - 1 ½” x 2 ½” x 6” -
Upper Door Stop
1 - ¾” x 2 ½” x 64” -
Lower Door Stop /Floor Threshold
(Steps 68 - 69)
1 - ½ x 2
½”
x 70” -
Interior Vertical Door Flange
(Steps 70)
1 - 45 ¼” - Extra Piece of Bevel Wall Siding - Use if wall panel
siding is damaged or to shim floor or door.
2 - pcs - Spare Shingles- use to shim door, etc
Note: All Trim, Facia and Bottom Skirting pieces will be positioned rough face out when installed.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 4
