15.
Position side solid wall into place on plywood floor. Butt both vertical
wall studs of side and rear walls together and attach with
3 - 2 1/2” Screws
.
Screw at the bottom, middle and top of stud to secure properly.
Hardware (Steps 15 -17)
S1
- 2 1/2” Screws
x 18 total
16.
With the corner wall attachment complete, position a second Side Wall panel in place so bottom
2x3 wall framing is sitting flush with outside floor joists and plywood floor. Wall siding should overhang
floor by approximately 4 1/2”. When positioned correctly, attach both Side Wall panel studs together
as shown.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 13
Do Not Attach Walls To
Floor Until Step 22
Side W
all
Rear W
all
Rear W
all
Side W
all
Optional
- Caulking seams
will help prevent moisture
from entering your shed.
Caulking not included in kit.
Pilot Hole
first.
