36.
With Rafter Section correctly aligned, secure rafters to walls using 90° Metal Brackets. Start with
outside rafters and secure 2 90° Metal Brackets with 1 1/4” screws. Screw into Wall Extension Framing
at the rear and Wall Panel top framing at the front. Complete both sides.
90° Metal
Brackets
37.
With outside rafters properly secured, completely secure remaining interior rafters using
8 - 3” Screws. Screw into rafters from inside of Header on an angle at front of shed, and from inside
of Extension Wall Framing at rear of shed.
Rear Soffit.
Front Soffit.
Rear of SpaceSaver
35.
When Rafter Section is positioned correctly, both Front and Rear Soffits will sit approximately 1/8”
away from wall siding. This can vary slightly.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 19