9.
Locate all
5 Interior Panels
(Part D) - 30 5/8”w x 22”h. and 4
Wide Interior Panels (Part DD) -
46”w x 22” h.
Panel siding is off-
set on framing. Orientate offset to
the inside. Align frame of
1st
Interior Panel (Part D)
with the
bottom of the front B panel. Line up
Interior panel framing flush with
front panel framing. Screw from
front panel framing into interior
framing with
3 - 2 1/2” Screws.
Hold framings tight together while
screwing.
D - Interior
D - Interior
B - Front
Interior Panel framing flush
with Front Panel Framing.
B - Front
B - Front
Interior frame
Panel Siding is
offset on framing.
Orientate offset
to the inside.
Panel Framing,
Flush.
11.
Align and attach framing of
(Part D) and (Part DD)
Panels as per
Steps 9 & 10.
Angle screw panels together with
3 - 2 1/2” Screws
from the inside.
DD - Interior
D - Interior
DD - Interior (inside)
2 1/2”
Screws.
10.
Align and attach framing of
Wide Interior Panel
(Part DD)
to 1st Interior panel framing. Angle screw
panels together with
3 - 2 1/2” Screws
from the inside.
Be sure to level the
ground so panels sit
evenly.
DD - Interior
DD - Interior
DD - Interior
D - Interior
2 1/2”
Screws.
Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 23