![background image](http://html.mh-extra.com/html/olt/8x12-garden-in-a-box/8x12-garden-in-a-box_assembly-manual_732281012.webp)
Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 12
16.
Lift and position completed short
Bed Rib Frame
and
place
between side and interior panel siding. Do not center
on panel framing. Align with bottom of panels. Secure with
6 - 2” Screws
per plate. Pre-drill to prevent Splitting.
Important -
Do not over screw! Complete both sides.
18.
Lift and center completed longer
Bed Rib Frame
on rear and end interior panels. Align with
bottom of panels. Secure with
6 - 2” Screws
per plate.
Important -
Do not over screw!
Flush with
bottom.
6 - 2 “
Screws.
17.
Complete remaining short
Bed Rib
Frames (5)
as per
Step 16.
Note that connection plate is
offset from inner panel joint.
Do not align connection
plate on vertical wall
framing. Offset as shown.
Connection plate is aligned with panel joint
on rear of Garden Bed only.